2
SAFETY WARNINGS AND REGULATIONS
m
WARNINGS
– After having removed the packaging
make sure that the product supplied is
integral and complete in all its parts. If
this is not the case, please contact the
Dealer who sold the appliance.
– The appliance must be used as intend-
ed by
Sime
who is not responsible for
any damage caused to persons, ani-
mals or things, improper installation,
adjustment, maintenance and improp-
er use of the appliance.
– In the event of water leaks, disconnect
the appliance from the mains pow-
er supply, close the water mains and
promptl
y inform professionally quali-
fied personnel.
– Periodically check that the operating
pressure of the water heating system
when cold is
1-1.2 bar (100-120 kPa)
. If
this is not the case, increase the pres-
sure or contact professionally qualified
personnel.
– If the appliance is not used for a long
period of time, at least one of the fol-
lowing operations must be carried out:
-
set the main system switch to "OFF";
-
close the gas and water valves for the
water heating system.
– In order to ensure optimal appliance
operations
Sime
recommends that
maintenance and checks are carried
out
ONCE A YEAR
.
– If the power cable is damaged, replace
it with a cable ordered as a spare part
with the same characteristics (type X).
Assembly must be by carried out by a
qualified professional.
– The concentration of CO in combustion
by-products must always comply with
the installation regulations of the coun
-
try where the appliance is installed.
–
This appliance is not suitable for pool
or SPA heating
–
It is recommended that all operators
read this manual carefully in order to
use the appliance in a safe and rational
manner.
m
WARNINGS
–
This manual
is an integral part of the
appliance. It must therefore be kept
for future reference and must always
accompany the appliance in the event
the appliance is transferred or sold to
another Owner or User or is installed
on another system.
–
Installation and maintenance
of this
appliance must be carried out by a
qualified company or by a profession-
ally qualified technician in accordance
with the instructions contained in the
manual. Once the work is complete,
the company or technician will issue a
declaration of conformity with national
and local technical standards and leg-
islation in force in the country where
the appliance will be used.
–
Any repairs on the appliance
must be
carried out solely by professional-
ly qualified personnel, using original
spare parts only. Failure to comply with
these instructions can jeopardise the
appliance’s safety and void the warran-
ty with immediate effect.
–
Fonderie SIME S.p.A.
reserves the right
to make improvements to its prod-
ucts at any time without prior notice,
without compromising their essential
characteristics. The graphic illustra-
tions and/or images in this document
may show optional accessories that
vary according to the country in which
the appliance is used.
–
The installer must explain to the User
the appliance’s operation and the safe-
ty instructions. Moreover, the installer
must hand the use and maintenance
instructions to the User after complet-
ing the installation.
– This appliance can deliver high tem-
perature water. Refer to the plumbing
code of Aus
tralia (PCA), local require-
ments and installation instructions to
determine if additional flow tempera-
ture control is required.
– Once the installation of the appliance
has been completed, professionally
qualified personnel must issue a dec-
laration of conformity with the Plumb-
ing Code of Australia (PCA).
–
Installation, use and maintenance of
the appliance must be carried out ac-
cording to the information given in the
manufactur
er’s manual.
To Next Page
Loading...
