To Next PageTo Next Page
Need help?Do you have a question about the Sime GO 18 BF G20 and is the answer not in the manual?
Guide on operating the boiler and its features.
Detailed overview of the boiler's components and characteristics.
Comprehensive guide for installing and servicing the boiler.
Crucial safety advice and general warnings for safe operation.
List of actions strictly prohibited to ensure user and appliance safety.
Important notes and precautions for safe handling and use.
Prohibitions related to children, electrical safety, and appliance usage.
Prohibitions concerning condensate, environmental exposure, and flammable materials.
Guide on operating the boiler, including control panel and settings.
Explanation of the boiler's control panel elements and functions.
Instructions for temporarily or long-term shutdown of the boiler.
Procedure for temporary boiler shutdown.
Steps for safely shutting down the boiler for extended periods.
Key features and design aspects of the GO BF boilers.
List and explanation of the safety mechanisms integrated into the boiler.
How to identify the boiler model and its technical specifications.
Diagram and labeling of the boiler's internal components.
Comprehensive technical specifications and performance data of the boilers.
Details about water circulation, sensors, and expansion vessel.
Information on the pump performance and detailed control panel functions.
Electrical schematic showing component connections and wiring.
Instructions for checking and handling the boiler upon delivery.
Requirements for the room where the boiler will be installed.
Procedures for cleaning the heating system and water treatment recommendations.
Specific steps for physically mounting the boiler onto the wall.
Details on connecting the boiler's water and gas pipes.
Requirements for flue gas ducts and air intake systems.
Guide to connecting external devices and power supply.
Instructions for connecting an external air temperature sensor.
Electrical connection of thermostats for boiler control.
Examples of integrating the boiler with different heating system configurations.
Procedures for refilling or emptying the boiler's water circuits.
Step-by-step guide for refilling the boiler system.
Step-by-step guide for emptying the boiler system.
Essential checks before starting the commissioning process.
Sequence of operations for initial boiler start-up and verification.
How to access and modify boiler operating parameters.
A detailed list and explanation of all configurable boiler parameters.
Function to view past error messages and malfunctions.
Procedures for performing checks and making adjustments.
Using the chimney sweep function for maintenance checks.
Instructions for converting the boiler to different gas types.
Steps before performing gas conversion, including flue gas analysis.
Detailed steps for calibrating the gas valve electronically.
Complete calibration process for the gas valve.
Partial calibration process for checking and adjusting the gas valve.
Guidance on adjustments requiring professional intervention.
Instructions for cleaning the exterior surfaces of the boiler.
Specific steps for cleaning the boiler's outer casing.
Procedures for cleaning internal components like the heat exchanger.
Detailed steps to clean the heat exchanger fins.
How to clean the burner and check the ignition/detection electrode.
Verifying smoke ducts, air inlet, and expansion vessel pressure.
Procedures for maintenance tasks that are not part of the regular schedule.
Comprehensive list of error codes and their corresponding troubleshooting steps.
General