Sime HOME - Alarms; Boiler; General Settings Information Technical; Hot Water

38
EN
clic
k
To “select” rows or “modify” values
To
“confirm” the selections or modifications
Zone heating
Room set 20.0°C
Heating set 0°C
Heating temp. 28.0°C
Boiler
Return temperature 25.0°C
Power output 0%
System pressure 1.2bar
Exhaust temp. _ _ _°C
Hot water
Hot water temp 51.2C
Hot water set 50°C
Flow rate --l/min
Alarm history
Historical index:
1
1 -------- 5
< ultimo
Alarm code: 255
255 - Technical problem
Modo: Inverno Progr. automatico - Set 18,0 Cfino alle 11:30
Menu Modo
INFORMATION
Zone heating [...]
Boiler [...]
Hot water [...]
Alarms [...]
Firmware version 100
GENERAL SETTINGS
Language [...]
Date and time [...]
Factory settings [...]
MENU
ENTER ACCESS CODE
Code:
0
0 0 0 0
[CONFIRM]
Zone heating
Room probe run YES
Room probe modul. YES
Ext. probe modul. YES
Weather comp.curve 3.0
Weather comp. offset 0°C
Backlash off temp. 0.1°C
System inertia 10
Flow temp.min. set 20°C
Antifreeze enable YES
Antifreeze set 5.0°C
Room probe offset 0.0°C
CONFIRM REQUEST

Confirm operation?
[CONFIRM]
CONFIRM REQUEST

Confirm operation?
[CONFIRM]
TECHNICAL
Zone heating [...]
Boiler parameters [...]
Total reset [...]
(paragrafo 4.2.1 a pagina 32)
(paragrafo 4.2.2 a pagina 35)
(paragrafo 4.2.3 a pagina 36)
(paragrafo 4.2.3 a pagina 36)
MENU
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
(These screens are for display purposes only. It is NOT possible to modify the data)
4.2.4 MENU button for navigation tree