Sime HOME - English

35
EN
4.2.2 INFORMATION Menu
The INFORMATION menu is for display purposes only and no
modification of the data can be made.
From the
“main screen”
Th 20 Mar 2014Zone 1 10:30
Winter manual - set 20.0°C
Menu Mode
– Press the button
Menu
to go into the screen to select
“Menu”
– Rotate the encoder to select the menu “INFORMATION”
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
I
NFORMATION
– Press the encoder
clic
k
to confirm “INFORMATION” and go
into the submenu
Esc Back
INFORMATION
Zone heating [...]
Boiler [...]
Hot water [...]
Alarms [...]
Firmware version 100
Z
one
h
eat
i
n
g
– Rotate the encoder to select the required submenu
– Press the encoder
clic
k
to confirm the submenu selected
and go into the display area for the relevant data
Esc Back
INFORMATION
Room temperature 20.0°C
Heating set 80°C
Heating temp. 30°C
Room tem
p
erature
– Press the button
Back
to go back to the submenus
– Rotate the encoder
to select another submenu
Esc Back
INFORMATION
Zone heating [...]
Boiler [...]
Hot water [...]
Alarms [...]
Firmware version 100
g
B
o
il
e
r
– Press the encoder
clic
k
to confirm the submenu selected
and go into the display area for the relevant data