Sime MINI 12 BF ErP User Manual

23
Trouble‐Shooting Guidance
Errors
Causes
F
lame
out
while
using
Non‐ignition
after
opening
the
cold
water
valve
D
eflagration
after
ignition
Y
ellow
flame
with
smoke
Abnormal
flame
with
strange
smell
I
gnition
with
strange
sounds
W
ater
still
not
hot,when
turning
t
o
the
high
temperature
position
W
ater
too
hot,
when
turning
to
t
he
low
temperature
position
Flame
out
when
turning
to
the
low
temperature
position
F
lame
not
out
when
the
cold
wa
ter
valve
is
closed
Solutions
Main gas valve off
•
Turn on the main gas valve
widely or change new gas.
Main gas valve half
on
• •
Turn on the main gas valve
widely
There is air in the gas
pipe
•
Constantly continue to turn
on the water supply
control valve
Supply gas
pressure
inappropr
iate
High
• •
Contact the technician to
check the gas source
pressure adjustment
valve
Low
• •
Main cold water valve
off
•
Turn on the water supply
main valve
Frozen
•
Reuse it until melting
Pressure of cold
water too low
• • •
Contact the technicians to
check water pressure
Adjust water
temperature wrongly
• •
Rotate the water flow
adjustment rod
appropriately
Air supply not enough
• •
Improve air exchange, and
let more fresh air in
External wind
pressure too high
• • •
Stop using it
Burner assembly
blocked
• • •
Contact after‐sales services
Heat exchanger
assembly blocked
• • •
The same as mentioned
above
Errors in the water
control device
• • • • •
The same as mentioned
above

Sime MINI 12 BF ErP Specifications

General

Brand	Sime
Model	MINI 12 BF ErP
Category	Water Heater
Language	English