Need help?Do you have a question about the Sime RX 19 and is the answer not in the manual?
Overview of the new series of gas-fired heating boilers and their compliance with standards.
Provides detailed dimensions for RX 19-26 and RX 37-48-55 boiler models with diagrams.
Details technical specifications including heat input/output, power consumption, water content, and pressure loss.
Presents performance curves for EURAMO MYL 30-25 and GRUNDFOS UPS 25-50 circulating pumps.
Diagram and key identifying internal components of the boiler for reference.
Requirements for the boiler room, including mandatory ventilation for safe operation.
Instructions for making hydraulic connections, emphasizing material and stress-free installation.
Guidelines for flue connection to ensure safe discharge of combustion products.
Advice on water treatment for heating systems and the procedure for filling the water system.
Details electrical connection requirements, including earthing and room thermostat integration.
Explanation of the overheat stat function, resetting, and automatic/manual resetting types.
Function of the smoke thermostat for flue gas discharge protection and its reset procedure.
Overview of electronic ignition, working cycle, and troubleshooting for IONO models.
Mandatory checks before the first ignition, covering water, gas, electrical connections, and safety.
Instructions for operating and adjusting Honeywell V 4600 C, SIT 830 Tandem, and Honeywell VR 4605 C gas valves.
Procedure for checking and adjusting gas pressure and input for optimal burner performance.
Steps for converting the boiler to LPG and procedures for removing the casing for maintenance.
Importance of gas pipe filters and detailed steps for annual cleaning and maintenance of the boiler.
A comprehensive guide to identify and resolve common faults and issues encountered with the boiler.
To Next Page
General