Sime SOLIDA Series - 3 Use and Maintenance; 3.1 Display Panel; 3.3 Powering Up the System

23
USE AND MAINTENANCE3
3.1 DISPLAY PANEL
1 D 3
2 4
5
C<><E;
~ÛÛ B]qÛ~
ÛÛ B]qÛ
Û B]qÛ
Û B]qÛ
ÛÛ B]qÛÛ¨FE£F==©
;Û ;akhdYq
Fig. 46
K`]Û\akhdYqÛhYf]dÛakÛYÛ[gfljgdÛhYf]dÛafl]f\]\Û^gjÛ[gfljgddaf_Ûh]dd]lÛgjÛZageYkkÛ^]]\]\Û^mjfY[]kÛgjÛZgad]jkÛafl]_jYlaf_ÛYÛl]eh]jY-
lmj]Ûk]fkgjÛYf\ÛYÛIK:Ûmk]\ÛlgÛlmjfÛgfÛgjÛg^^Ûl`]Û[gfljgdd]\Û`]Yl]jÛYlÛhj]k]lÛ`gmjk
K`]ÛhYf]dÛ ¨J]]Û=a_Û ©ÛakÛ ]imahh]\Ûoal`ÛYfÛ gf£g^^ÛZmllgfÛoal`Ûl`]Û [gjj]khgf\af_Û@£FÛ a[gfÛYf\Û Ûo`al]Û[aj[d]\Ûc]qkÛ o`gk]Û
^mf[lagfÛ\]k[jahlagfkÛYhh]YjÛgfÛl`]Û\akhdYqÛ[dgk]ÛlgÛ]Y[`Ûg^Ûl`]e
POWERING UP THE SYSTEM3.3
PANEL STARTUP AFTER CONTROLLED HEATER TYPE SETTING3.3.1
The display shows the Start screen (See “Fig. 48 START screen”)
SYSTEM START UP3.3.1.1
When starting up, the display shows a “wait” screen; during this time SIME appears on the second line while on the first line the water flow temperature
and time will be shown. This screen is shown in Fig. 47:

o
:?2O ~  23
J@D< >
RESET screenFig. 47