Need help?Do you have a question about the Sime SOLIDA Series and is the answer not in the manual?
General| Model | SOLIDA Series |
|---|---|
| Category | Boiler |
| Fuel Type | Natural Gas / LPG |
| Heat Exchanger Material | Stainless Steel |
| ErP Rating | A |
| Type | Condensing |
| Heat Output (kW) | 24 kW to 32 kW |
| Efficiency | Condensing |
| Efficiency (%) | Up to 98% |
| Modulation Range | 1:7 |
| NOx Class | 5 |
| Control System | Digital |
| Dimensions (HxWxD) | 700 x 400 x 300 mm |
| Water Pressure | Max. 3 bar |
| Warranty | 2 years |
Table of technical specifications like heat rate, duration, volume, etc.
Requirements and procedures for installing the boiler.
Requirements for installing the boiler in a dedicated room.
Guidelines for connecting the flue system to the boiler.
Instructions for connecting the heating system to the boiler.
Diagram showing the open expansion tank system connections.
Checks to perform before using the boiler for the first time.
Table of technical specifications for pellet operation.
Procedures for installing the boiler with pellet kit.
Step-by-step guide to adapt the boiler for pellet use.
Guide to connecting electrical components for pellet operation.
Electrical schematic showing main board and hydro board connections.
Key components and parts of the pellet burner.
Properties and classification of recommended wood pellets.
Steps for powering up the system and initial display screens.
Menu for viewing and managing alarm conditions.
Recommendation for annual servicing by qualified personnel.
To Next Page