Sime SOLIDA Series - 2 Operation with Pellets and Special Kit; 2.1.2 Technical Features

9
1080
1010
1160
890 L
P425470
SOLIDA 5 PL SOLIDA 8 PL +
C ~Ûee ~Ûee
G ~Ûee ~Ûee
2.1 DESCRIPTION
The SOLIDA boilers may be adapted to oper-
ate with pellets.
This is achieved with use of the SOLIDA PL
pellet kit, consisting of:
Burner with incorporated electronic control.1.
Pellet feed with motor and screw feeder.2.
A 80 litre pellet store (formed from the 3.
accessory packaging). NOTE available
separately are a 200, 300 or 500 litre
pellet store.
8[[]kkgjqÛcalÛ[gflYafaf_4.
SOLIDA
5 PL
8 PL +
Y© front spacers fµÛ fµÛ~
Z© ZY[cÛkhY[]jk n° 2 n° 4
[© deflectors n° 3 fµÛ
\© []e]flÛZja[ck n° 2 n° 3
]© ppÛ_Ykc]l fµÛ~ fµÛ~
Only pellets that comply with EN 149961-
2, ENplus- A1. should be used with this
appliance.
The boiler complies with Class 3 in accord-
ance with EN 303-5.
OPERATION WITH PELLETS AND SPECIAL KIT2
2.1.1 OVERALL DIMENSIONS
Fig. 12
2.1.2 TECHNICAL FEATURES
Model SOLIDA 5 PL SOLIDA 8 PL +
Nominal thermal output
kW
 
Minimum thermal output
kW
 
Nominal heat input
kW
 
Minimum heat input
kW
~ ~~
Maximum useful efficiency
%
 
Minimum useful efficiency
%
 
Boiler classification
:dYkkÛ :dYkkÛ
CO mg/Nm
3
at 10% of O2 at the nominal thermal input
~~ ~~
CO mg/Nm
3
at 10% of O2 at the minimum thermal input
~ 
OGC mg/Nm
3
at 10% of O2 at the nominal thermal input
 
OGC mg/Nm
3
at 10% of O2 at the minimum thermal input
~ ~
G mg/Nm
3
at 10% of O2 at the nominal thermal input
 ~
G mg/Nm
3
at 10% of O2 at the minimum thermal input
--
Size of a pellet container with a capacity of 200 dm
3
H
~~ ~~
L
 
Size of a pellet container with a capacity of 300 dm
3
H
~~ ~~
L
 
Size of a container with a capacity of 500 dm
3
H
~~ ~~
L
 