4
Position your DA2100 Series amplifier in the desired location, and ensure the amp is stable.
INITIAL SETUP
Floor Pole
(speaker stand not included)
Free-standing
POWER
• Make sure the
1
power switch is set to the off position.
• Connect the included detachable IEC power cable from a power
outlet to the
2
power cable input.
• The
3
red voltage switch comes factory-set to the position
appropriate for the market where the amplifier is sold. For the USA,
this is 110-120V.
1
3
2
21506756 Simmons DA2100 Series manual_REV.indd 421506756 Simmons DA2100 Series manual_REV.indd 4 6/14/21 10:55 PM6/14/21 10:55 PM
To Next Page
Loading...
