Need help?Do you have a question about the Simmons DA50 and is the answer not in the manual?
Power| output power | 50W / 8 ohm |
|---|---|
| headphone output power | 500mW / 32 ohm |
| AC power requirements at full output | 80W |
| AC power requirements at idle | 7W |
Audio Specifications| frequency response | 20 - 20KHz |
|---|---|
| total harmonic distortion at full output | 1.00% |
| total harmonic distortion nominal | 0.05% |
| hum and noise all controls down | -60 dBV |
| hum and noise all controls at 12 o’clock | -55 dBV |
| input impedance | 10K ohms |
| input levels for drum inputs | -10 dBV |
| input levels for aux | -10 dBV |
| input levels for line in | 0 dBV |
Tone Controls| EQ center frequencies | 60 Hz, 800 Hz, 10 kHz |
|---|---|
| EQ adjustment range | ±12 dBV |
Speakers| woofer size | 10” / 250mm |
|---|---|
| tweeter size | 2” / 51mm |
Weight and Dimensions| weight | 33 lbs / 15 Kg |
|---|---|
| depth | 15.5” / 39.37cm |
| width | 15.5” / 39.37cm |
| height | 16” / 40.64cm |
General warnings regarding noise exposure, electrical shock, and proper usage of the apparatus.
Guidelines for handling, power supply, location, cleaning, and electrical interference.
Details on drum inputs, aux input, volume, equalization, line input, and headphone jack.
Highlights slot-port design, speaker grill, woofer, tweeter, control knobs, handle, and power socket.
To Next Page
