Need help?Do you have a question about the Simmons DA2110 and is the answer not in the manual?
Highlights the modern 2-way speaker design for accurate drum sound reproduction.
Explains using two amps for immersive stereo sound with unified control.
Details how to position the amp on the floor or a speaker pole for optimal dispersion.
Lists primary features of the DA2112, including power, inputs, EQ, and monitoring.
Lists primary features of the DA2110, including power, inputs, EQ, and silent practice.
Lists primary features of the DA2108, including power, inputs, EQ, and silent practice.
Details the DA12S subwoofer's role in adding low frequencies and its technical specifications.
Instructions for connecting the power cord and choosing the correct voltage setting.
Explains how to install the mobile device holder for convenient placement during use.
Guides users on connecting their Bluetooth source device to the amplifier.
Provides troubleshooting steps for common Bluetooth pairing and connectivity problems.
Details how to connect sound modules and other audio sources to the amplifier's inputs.
Explains the rear panel switch for mono or stereo input routing.
Describes how to adjust volume, use the voicing switch, and fine-tune tone with EQ knobs.
Guides on powering on the amplifier and setting input levels for optimal sound.
Details how to connect two identical amplifiers for a master/slave stereo configuration.
Explains how to integrate a subwoofer or send a direct out signal from the amplifier.
Illustrates the physical layout of controls and connections for the DA2108 model.
Illustrates the physical layout of controls and connections for the DA2110 model.
Illustrates the physical layout of controls and connections for the DA2112 model.
Shows the location and function of the rear panel power inlet, voltage selector, and fuse.
Explains balanced line inputs, link jacks, and direct out jack functions.
Describes front panel aux input, Bluetooth audio input, and their controls.
Details the voicing switch, input level knobs, and EQ knobs for sound shaping.
Covers DA2112 input routing, headphone, and master volume controls.
Explains the meaning of the Power LED and Clip LED for status monitoring.
Details the power inlet, switch, and fuse compartment for operation and maintenance.
Provides quick start steps for the DA12S, including setup and signal level adjustments.
Illustrates various connection configurations for the DA12S subwoofer.
Details combo inputs, outputs, and the level switch for matching source output.
Explains crossover, phase, and time aligning delay settings for bass optimization.
Covers the IEC power input, voltage selector, fuse, and power switch.
Lists specifications for DA2108 and DA2110, including power, drivers, and dimensions.
Lists specifications for DA2112, including power, drivers, EQ, and dimensions.
Provides specific details on input 3 routing and EQ frequency ranges for the DA2112.
Details specifications for the DA12S, including inputs, outputs, power, and speaker parts.
Lists unit/package dimensions, weights, and overall features of the DA12S.
Covers essential precautions for operating, cleaning, and ventilating the amplifier.
Details safety measures for power cords, plugs, grounding, and outlets.
Provides guidance on proper appliance use, servicing, and the use of recommended accessories.
Advises on unplugging during storms and using specified replacement parts for safety.
Warns about electric shock risk and prohibits opening the amplifier chassis.
Discusses hearing damage risks from high sound levels and provides exposure limit tables.
Outlines the terms of the limited two-year warranty for Simmons products.
Provides FCC compliance details and RF exposure requirements for the device.
To Next Page
General
