SIMONINI Racing MINI 3

To Next Page

page 1

MINI 3

This handbook aims to bring to the attention of key technical, functional and maintenance of your motor MINI 3. Read carefully the following pages, will be synonymous

with safety, reliability and great satisfaction durable.

This manual is considered part of the motor MINI 3, in case of transfer, will be delivered to the new owner.

About this manual lists all of the information available at time of printing. The SIMONINI RACING srl reserves the right to modify or change without notice.

Main Page

Need help?

Do you have a question about the SIMONINI Racing MINI 3 and is the answer not in the manual?

Summary

Technical Data

Operational Specifications

Tightening Torques

Specifies Nm and Kgf.m torque values for various screws and components of the engine.

Electrical Diagram

Illustrates the engine's electrical system, including battery, rectifier, and generator connections.

Engine Installation and Fuel

Installation Guidelines

Details the process of fitting the engine to the frame and safety precautions during installation.

Fuel Mixture Requirements

Specifies the recommended oil-to-gasoline ratio and octane rating for optimal engine performance.

Carburetor and Fuel System

Carburetion Adjustments

Explains how weather and altitude affect air-fuel mixture and advises on jet adjustments.

Running-In Procedure

Maintenance Schedule

Belt Tension Adjustment

Instructions for checking and adjusting the engine's belt tension for optimal performance.

20-Hour Maintenance Intervals

Lists essential checks and cleaning tasks to be performed every 20 operating hours.

60-Hour Maintenance Intervals

Specifies replacement and inspection tasks required every 60 operating hours.

Extended Maintenance and Checks

200-Hour Maintenance Intervals

Details component replacements and wear checks for bearings, seals, cylinder, and piston.

Component Wear Limits

Piston and Crankshaft Checks

Provides measurements and height limits for piston, pin, rings, and crankshaft centering.

Operating Temperatures and Reed Valves

Temperature Limits

Defines maximum allowed exhaust gas and spark plug temperatures during operation.

Reed Valve Verification

Instructions for checking the reed valve for proper seating and absence of space.

Optional Components and Tools

Customization Options

Lists available pinions, propellers, and maintenance tools for engine customization.

Warranty and Service Information

Warranty Coverage

Outlines the 12-month warranty period and conditions, excluding wear parts.

Repair Request Procedure

Details required information and shipping instructions for warranty repair or replacement.