page 13
We also inform you that high exhaust gas temperatures, in many cases, are a
symptom of poor carburetion. While high temperatures under the spark plugs,
usually, are due to poor ventilation (heat dissipation) of the engine, caused by the
presence of bodies and / or materials that prevent the passage of air cooling.
COMPONENTS AND TOOLS ON REQUEST
To have the possibility to customize the engine and then adapt it to different needs
and methods of use, SIMONINI offers a range of components on request:
▪ PINION
In three different diameters (58/62/64) as well as providing the proper
reduction ratio, can be used to soften or make more rapid rise in engine
speed or to move, maintaining the propeller revolutions, any points of the
torque curve that does not meet your needs at a specified "range" of use, as
when cruising.
Code MINI3/53 mm. 58
Code MINI3/53 mm. 62
Code MINI3/53 mm. 64
▪ PROPELLERS
We propose a two-blades wooden propeller, tractor or pushing configuration
Code E03 cm. 145
▪ MAINTENANCE TOOLS
To facilitate maintenance operations, we propose two distinct tools with the
aim of extracting the ignitions flywheel and engine pulley:
Code U01 Pinion extractor
Code U02 Fly-wheel extractor
To Next Page
Loading...