31
OPERATION
9. Touch the temperature/cooking time selection button to switch between
the temperature and cooking time settings.
10. Touch the temperature/cooking time setting button
to increase or
decrease the cooking time (1–60 minutes). Press and hold the temperature/
cooking time setting buttons for the quick setting.
11. If necessary, touch the Sync button and Shake button to activate the
corresponding feature(s).
12. Once you have set the food type, cooking time and temperature, wait approx.
3 seconds. The settings are saved automatically and the device starts to
operate. Alternatively, touch the Start/Pause button to start the cooking
process immediately.
13. The cooking process stops automatically once the cooking process has
finished: an acoustic signal sounds and the word “End” appears on the display
(9). The built-in fan continues running for approx. 30 seconds to cool down
the appliance.
14. Touch the On/Off button
to switch the appliance off: the On/Off
button lights up and the appliance is now in Standby mode. Next
disconnect the mains plug (3) from the electrical outlet.
15. Pull the hot air frying baskets (12) out of the heating chambers (6) using the
handle (11). Place the food on a plate or in a bowl.
16. Let the appliance cool down completely and clean it along with the
attachments according to the “Cleaning” section.
Cooking instructions
The following table can help you find the basic time and temperature settings for
preparing your food.
• The hot air frying time and temperature depend on the food type and its
consistency. The above values should therefore only be seen as reference values.
You can also use your own experience or follow the instructions on the food
packaging.
• Pleasenotethatthebaking/cookingtimesinthehotairfryerdierfromthosein
a normal oven.
• Smalleringredientsonlyrequireslightlyshorterpreparationtimesthanlarger
ingredients.
• Smallamountsoffoodonlyrequireslightlyshorterpreparationtimesthanlarge
amounts of food.
To Next Page
Loading...