INTRODUCTION
The 2120 Multiplex System consists of equipment that is designed to provide fire alarm, security, and energy
management functions. As such, you must make sure that the system is installed in strict compliance with
.I national, state, and local codes.
The 2120 can be configured in many different ways, depending on customer requirements. Since the system is
so versatile, installations will vary significantly from site to site. The purpose of this publication is to provide
general installation considerations and instructions for the major components of the system. Specific installation
drawings are provided with each system.
Receiving/Inspecting Equipment
When the equipment cartons are received, examine each for signs of damage that may have occurred during
shipping.
If you detect damage, you must immediately place a claim with the carrier. If you know the extent of the damage,
inform the carrier.
If possible, leave the equipment in the original containers until installation time.
Basic System Components
Although a 2120 system may include other equipment, the basic system components are shown below.
The Basic Multiplex, or BMUX
FIGURE 1
One or more Transponders
FIGURE 2A
3
To Next Page
Loading...
