One or more Expanded Transponders
FIGURE 28
One or more Status Command Centers (SCCs)
FIGURE 3
Each equipment carton will be marked to identify its contents. Transponder equipment cartons will be marked with
the transponder number (or numbers) to identify the unit’s relative location in the system. The specific location
of each piece of equipment is identified in the documentation supplied with the system.
Removing Equipment from Cartons
When you remove the equipment from the cartons, choose tools that will open the cartons with a minimal amount
of jarring. Be careful not to extend the tool into the container far enough to damage the equipment. As you remove
the equipment, inspect it for signs of damage (dents, bent corners, etc.).
When possible, leave all documents with the associated equipment. Otherwise, be sure to mark both the
documents and the inside of the equipment so that they can be reunited later.
4
To Next Page
Loading...
