Simplicity 5900820 - Setup Procedures; Quick Setup List

Citation - 52” & 61” Mower Decks
www.simplicitymfg.com2
Quick Setup List
Page Setup Procedure Steps to Perform
3 Uncrating
❏
❏
❏
❏
Remove Crate & Banding.
Loosen Hydraulic Release Valves.
Release Parking Brake and Roll Tractor forward off skid.
Tighten Hydraulic Release Valves.
3 Connect Battery Cables
❏
Connect Battery Cables.
4 Tractor Assembly
❏
❏
❏
Assemble the Ground Speed Control Levers.
Assemble the Seat.
Connect the Seat Switch Harness.
5 Roll Bar Assembly
❏
❏
❏
Assemble the Retainer Pins.
Assemble the Top Loop.
Install the Roll Bar.
7 Check Fluid Levels
❏
❏
❏
Check Engine Oil Level.
Check Hydraulic Oil Level.
Check Tire Pressure
8 Check Mower Assembly
❏
❏
❏
Check Blade Bolt Torque
Check and Level Mower Deck
Check Deck Drive Belt
14 Lubrication & Fuel Preparation
❏
❏
❏
Lubricate all grease and oil points.
Add fuel.
Start the Engine.
16 SAFETY CHECK
❏
❏
❏
Check for LOOSE HARDWARE.
Check all OPERATOR CONTROLS.
Perform SAFETY INTERLOCK SYSTEM CHECK.
Register Product
❏
To register the product: log onto www.thepowerportal.com,
select the appropriate brand, click “My Resources,” select the
“Product Registration and Rebate” icon and then the “New
Product Registration / Rebate” tab. Fill out and submit the
online product registration form.
Setup Procedures
Not for
Reproduction