To Next PageTo Next Page
Need help?Do you have a question about the Simplicity 5900800 and is the answer not in the manual?
Provides introductory safety information and notes.
Lists essential safety rules for operating the equipment.
Details safety precautions for operating on slopes.
Identifies and explains various safety decals on the unit.
Illustrates safety icons and associated hazard warnings.
Covers further warnings related to operational hazards.
Outlines pre-operation checks for the mower and collection system.
Provides guidance on efficient and safe mowing techniques.
Describes post-operation cleaning and proper storage procedures.
Explains the procedure for operating the mower without the collection system.
Instructions for adjusting the rear suspension mounting position.
Guidance on adjusting the spring pre-load for operator weight.
Steps to prepare the mower deck for chute removal.
Steps for adjusting the blower mount assembly baffle.
Detailed instructions for assembling the blower unit.
Procedures for removing and installing spindle belts and pulleys.
Steps for reinstalling the blower belt and deck guards.
Completes the installation of the blower belt guard and deck guard top.
Instructions for installing the collector mount plate and related hardware.
Steps to install the deflector and connect the collector hose.
Procedure for attaching the collector bags and cover.
Instructions for installing the weight carrier and counter weights.
Step-by-step guide for removing the blower and collector assembly.
Provides introductory safety information and notes.
Lists essential safety rules for operating the equipment.
Details safety precautions for operating on slopes.
Identifies and explains various safety decals on the unit.
Illustrates safety icons and associated hazard warnings.
Covers further warnings related to operational hazards.
Outlines pre-operation checks for the mower and collection system.
Provides guidance on efficient and safe mowing techniques.
Describes post-operation cleaning and proper storage procedures.
Explains the procedure for operating the mower without the collection system.
Instructions for adjusting the rear suspension mounting position.
Guidance on adjusting the spring pre-load for operator weight.
Steps to prepare the mower deck for chute removal.
Steps for adjusting the blower mount assembly baffle.
Detailed instructions for assembling the blower unit.
Procedures for removing and installing spindle belts and pulleys.
Steps for reinstalling the blower belt and deck guards.
Completes the installation of the blower belt guard and deck guard top.
Instructions for installing the collector mount plate and related hardware.
Steps to install the deflector and connect the collector hose.
Procedure for attaching the collector bags and cover.
Instructions for installing the weight carrier and counter weights.
Step-by-step guide for removing the blower and collector assembly.
The provided manual describes the Simplicity FAST-Vac Grass Collection System, an accessory designed for use with Simplicity mowers, specifically those with slope-nosed style mower decks. This system is intended for the efficient collection of grass clippings during lawn maintenance. The manual covers its installation, general operating instructions, safety guidelines, and removal procedures.
The FAST-Vac Grass Collection System operates by utilizing a blower mechanism to create a powerful vacuum that draws grass clippings from the mower deck through a discharge chute and into collection bags. This system is designed to provide a clean cut and efficient collection, preventing the accumulation of clippings on the lawn. It is specifically configured for 52" and 61" mower decks on Citation and Cobalt models, offering a 3-bag collection capacity. The system includes a FAST-Vac Blower, a Bagger Mount Adapter, a 3-Bag Hood & Mount, a Blower Mount, a Weight Mount, and three 50 lbs. weights, indicating a comprehensive setup for effective grass collection and proper weight distribution for stability.
The manual emphasizes several key usage features to ensure optimal performance and safety. Before operation, users are instructed to clear the lawn of debris like sticks, stones, and wire to prevent damage to the mower blades and collection system. Grass condition is also important; wet grass is more likely to clog the system, so mowing when the grass is dry is recommended for efficient bagging. Air circulation is crucial for effective collection, requiring the underside of the mower and catcher lid to be free from grass and debris.
When mowing, the throttle should always be at full speed to ensure maximum efficiency of the collection system. For long or lush grass, it may be necessary to reduce ground speed or make multiple passes, starting with a higher cutting position and then lowering it. The collection system should not be kept more than half full when negotiating slopes to maintain rider stability and prevent tipping. Mowing across the face of slopes, rather than up and down, is also advised. The system is designed for finish cutting of established lawns and is not intended for other purposes.
The manual provides detailed instructions for installing the system, including adjusting the rear suspension to accommodate the added weight of the grass bagger. This involves pivoting the shock to a specific position and, for heavier operators, adjusting the spring pre-load. The discharge chute opening on the mower deck needs to be prepared by removing the existing chute and, in some cases, drilling an additional hole. The blower mount assembly, including an adjustable deflector bracket, is then installed and adjusted to ensure proper alignment with the mower deck baffle. The spindle belt is removed and replaced with a double spindle pulley to drive the blower. The blower itself is then installed, and the drive belt is routed and tensioned correctly. Finally, the collector mount plate, back plate, hose, and collection bags are installed, with specific instructions for securing all components and ensuring a proper fit. The rear drive tire air pressure should be increased to 22 psi (151 kPa) after installation.
Regular maintenance is crucial for the longevity and performance of the FAST-Vac Grass Collection System. After each operation, users should remove any debris from the screen on the underside of the lid, which can be partially removed for easier cleaning. The blower housing and tube should also be removed and cleaned regularly to prevent clogs and maintain efficient airflow. The grass bags need to be inspected periodically for tears, holes, or weak spots, and replaced with new bags that meet manufacturer's durability standards when necessary.
For storage, the grass catcher should be thoroughly cleaned using a mild detergent, and any debris removed from the lid screen. If paint on metal parts has been scratched, touch-up paint or a thin film of oil should be applied to prevent corrosion. The system should be stored in a dry area, and the catcher and bags should be hung to dry thoroughly before long-term storage to prevent moisture damage.
The manual also outlines procedures for removing the blower and collector when not in use. This involves loosening knobs, releasing belt tension, removing the hose, quick pins, and the hitch pin, allowing the bagger unit to be lifted off the mount plate. When the blower is removed, the mower deflector must be properly installed in the down position for safe operation.
Safety is a paramount aspect of maintenance and operation. Users are warned to always disengage the electric clutch (PTO), shut off the engine, and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system. Hands should never be placed into the blower housing to clear jammed objects, as the blower may rotate unexpectedly. Regular checks of the collection system to ensure it is bolted tightly to the rider are also emphasized. The manual includes a comprehensive set of safety decals and warnings that must be understood and followed to prevent personal injury or damage to the equipment. These include warnings about rotating blades, thrown objects, rollover hazards, loss of traction, and dismemberment, all of which require specific precautions and proper use of personal protective equipment.
General| Engine | Briggs & Stratton |
|---|---|
| Drive System | Rear-wheel drive |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
