13
TP-400-2488-00-RT-S
Wheel and Tiller Shaft Group
1 1716793 1 CAP, Rear Bearing
2 1716825 1 SHIM SET, Rear Bearing Cap
2 1716826 1 SHIM, 0.062 Thickness x 1-3/4” (As Required)
2 1716827 1 SHIM, 0.030 Thickness x 1-3/4” (As Required)
2 1716828 1 SHIM, 0.015 Thickness x 1-3/4” (As Required)
2 1716829 1 SHIM, 0.010 Thickness x 1-3/4” (As Required)
3 1716810 2 BEARING, Tapered ( Cone & Race )
4 1716824 4 SPACER, 1” x 1-1/4” x 1/16”
5 1716816 4 BUSHING
6 1716815 4 SHIM SET, Axle Spacer
6 1716817 1 SHIM, 0.062 Thickness x 1-3/8”
6 1716818 1 SHIM, 0.030 Thickness x 1-3/8”
6 1716819 1 SHIM, 0.015 Thickness x 1-3/8”
6 1716820 1 SHIM, 0.010 Thickness x 1-3/8”
7 1716830 4 RING, Snap Internal Retainer
8 1716791 4 SEAL, Housing
9 1716809 1 SHAFT, Main Drive
10 1716821 2 RING, Snap External Retainer
11 1716797 1 SEAL, Oil Drive Shaft
12 1716814 1 GEAR, Worm Wheel Shaft
13 1716812 1 SHAFT ASSEMBLY, Wheel w/Lock Pin
14 1716813 2 KEY, Parrallel Plane
15 1716823 1 GEAR, Worm Shaft
16 1716822 1 SHAFT ASSEMBLY
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1693704 616RT, 6HP Rear Tine Tiller
To Next Page
Loading...