Need help?Do you have a question about the Simplicity 9518 Series and is the answer not in the manual?
General| Fuel | Gasoline |
|---|---|
| Engine Power | 18 HP |
| Drive | 2WD |
| Transmission | Hydrostatic |
| Turning Radius | 18 inches |
| Engine | Briggs & Stratton |
Details on the grade and quality of diesel fuel required for optimal engine performance.
Guidelines for proper storage of diesel fuel to prevent contamination and maintain quality.
Instructions on how to open and close the engine hood for access to the engine.
Technical specifications for the engine, including bore, stroke, displacement, and fluid capacities.
Key physical dimensions, wheelbase, tread width, and shipping weight of the tractor.
Fundamental safety principles and advice for operating equipment safely.
Detailed safety instructions to prevent accidents and injuries during tractor operation.
Explanation and location of safety and operational decals on the tractor.
Specific safety instructions for the tractor's hydraulic system.
Chart outlining recommended service intervals for various tractor components.
Detailed guide on service subjects, required lubricants, and service intervals.
Instructions for checking, changing, and servicing engine oil and oil filters.
Procedures for checking and changing transmission and hydraulic system oil and filters.
Guidance on battery care, checking electrolyte, and servicing the air cleaner.
Instructions for servicing the fuel tank, shut-off valve, and sediment bowl.
Information on alternator charging system and injection pump lubrication.
Procedures for safely starting and stopping the tractor engine.
Guidelines for the initial engine break-in period to ensure longevity and performance.
Instructions on using the transmission gear shift lever and clutch pedal.
How to use the tractor's brake pedals, lock lever, and PTO shaft.
Steps for attaching implements using the 3-point hitch system.
Information on correct tire inflation pressures and adding tractor weight.
Adjustments for position control lever friction and rate of lower control.
Procedures for adjusting the engine clutch pedal and brake pedals.
Instructions for servicing front wheel bearings and adjusting the operator's seat.
Schematic diagram illustrating the tractor's electrical system.
Guide to metric components, thread identification, and unit conversions.
Reference charts for suggested assembly torque values for bolts and conversion data.
To Next Page