Simplicity 9518 Series - Page 36

OPERATING CONTROLS &' INSTRUMENTS
P.T.O. $HIFT LEVER (Figure 23)
The shift lever located on the R.H. side of the transmis¬
sion controls the P.T.O. It has two positions - “ON” in
forward position and “OFF” i n rear position.
NOTE: The P.T.O. must only be engaged and disen¬
gaged while clutch pedal is completely depressed and
tractor motion stopped.
If tractor engine is stopped while the P.T.O. lever is en¬
gaged, the P.T.O. lever must be moved to disengaged
(rear) position before tractor engine can be started.
T-69371
FIGURE 23
1. P.T.O. Shift Lever 2. Gear Shift Lever
34