To Next PageTo Next Page
Need help?Do you have a question about the Simplicity 960 and is the answer not in the manual?
General| Type | Two-Stage |
|---|---|
| Starter | Electric Start |
| Auger Material | Steel |
| Clearing Width | 24 inches |
| Throw Distance | 40 feet |
Read and understand all instructions before operating the unit.
Inspect area and ensure proper setup before starting the snowthrower.
Key safety precautions for operating the snowthrower.
Precautions regarding children's presence during operation.
Safety decals specific to North American models.
Safety decals specific to CE models.
Explanation of various warning symbols used in the manual.
Explanation of various danger symbols used in the manual.
Where to find model and serial numbers for service.
Explanation of the markings on the CE identification tag.
Diagram showing location and basic function of controls.
Details on Auger Control, Chute Direction, and Deflector.
Details on Starter, Fuel, Primer, Throttle, and Choke.
Overview of general operating procedures.
Pre-operation checks for safety and function.
Explanation of controls used for starting the engine.
Step-by-step guide to starting the snowthrower engine.
Step-by-step guide to operating the snowthrower.
Procedure for safely clearing a clogged chute.
How to use the speed selector for different conditions.
How to adjust the snow discharge deflector.
Adjusting scraper bar height using skid shoes.
Using Easy Turn and traction lock for maneuverability.
Steps to take after each snowthrower use.
Recommended maintenance tasks and frequencies.
How to check and maintain tire pressure.
Procedure for lubricating the auger gear case.
Details on various lubrication points and methods.
How to check and lubricate the Free-Hand linkage.
Procedure for lubricating the auger shaft assembly.
Guide to diagnosing and resolving common snowthrower problems.
How to adjust the speed selector linkage.
Adjusting the auger drive belt tension.
Adjusting the traction drive belt tension.
Performing adjustments after initial use.
Adjusting the manual chute control linkage.
Adjusting the chute direction control rod gears.
Adjusting the electric chute rotator motor.
Adjusting the Easy Turn™ control cable.
Procedure for replacing shear pins.
Step-by-step guide for replacing drive belts.
Information on obtaining replacement parts.
List of available maintenance supplies.
How to obtain additional technical manuals.
