26
DECORATIVE RIBBON ATTACHING
This stitch is ideal for decorative topstitching. Use alone
or topstitch over ribbon or cording. Use a variegated
thread for extra pizzazz.
Place the ribbon along the stitching line [Fig. 1].
When stitching over ribbon, it’s easiest to secure the rib-
bon in place with fabric adhesive. Select a stitch width
to match the ribbon width and sew.
MOCK SMOCKING
Recreate elegant smocking in a fraction of the time it
takes to hand smock.
Sew sev
eral rows of basting stitches on the fabric. Pull
the bobbin thread to gather fabric to the desired fullness.
Select the honeycomb stitc
h G.
Sew between the basting stitches [Fig. 2]. Remove the
basting stitches when complete.
ATTACHING RIB KNIT TRIM
This second overcast stitch is ideal for sewing knits and
attaching rib trim because it seams and overcasts at the
same time.
For 1/4” seam allowances, guide the matched edges of
the seam allowances along the right edge of the
foot [Fig. 3].
For 1/2” to 5/8” seam allowances, guide the matched
edges of the seam allowances along the seam guide
marking on the needle plate [Fig. 4].
Sew, then trim the excess fabric close to the stitching
[Fig. 5].
BUILT-IN STITCHES
STITCH “G” - HONEYCOMB
STITCH “H” - SLANT OVERCAST
STITCH STITCH WIDTH STITCH LENGTH PRESSER FOOT
H 5 3-4 All-purpose
Fig. 3
Fig. 4
Fig. 5
Rib knit trim
STITCH STITCH WIDTH
STITCH LENGTH PRESSER FOOT
G 5 3-4 All-purpose
STITCH STITCH WIDTH STITCH LENGTH PRESSER FOOT
G 4-5 3-4 All-purpose
Fig. 1
Decorative honeycomb stitch
Fig. 2
Mock smocking
To Next Page
Loading...
