MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models Before Spring 8 25 100 200 Yearly
Each Use & Fall Hours Hours Hours Hours
Clean Debris from Rider and Engine Compartment * •
Clean Debris from Engine Cooling Areas & Air Filter * •
Check Tire Pressure •
Lubricate Rider & Mower * •
Clean Deck & Check/Replace Mower Blades •
Clean Battery & Cables •
Check Rider Safety System ** • • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE, 8 Hours or 25 Hours or 50 Hours or 100 Hours or Yearly
20HP Briggs & Stratton Daily Every Every Every
Season Season Season
Check Engine Oil Level * •
Service Air Pre-Cleaner * •
Change Oil * •
Service Air Filter * •
Change Oil & Filter * •
Clean Cooling Fins * •
Replace Air Filter * •
Replace Spark Plug •
Replace Fuel Filter 1 •
Check Valve Clearance 1" •
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
1"These services should be performed by your dealer.
16
To Next Page
Loading...
Need help?
General
