PART NO. DESCRIPTIONREF NO QTY.
Lift Group
Footnotes
NUT, Hex Jam, 7/16-14, NC-2B 1 1922007SM 4
TRUNNION 2 1734042SM 2
ROD, Bail 3 1733381SM 1
ARM, Mower Lift L.H. 4 1733535ASM 1
BOLT, Shoulder 5009X67MA 2
NUT, Hex Whiz Lock Flange, 5/16-18 6 1931277SM 5
NUT, Hex Whiz Lock Flange, 3/8-16 (Used on 44" & 50" Models only) 7 1931211SM 4
PIN, Threaded Shoulder 8 094067MA 2
WASHER, 1/2" 9 1960170SM 2
CLIP, Hair Pin 10 1960074SM 4
RING, Klipring, 5/8" 11 1704420SM 2
NUT, Hex Flange, 3/8-16 ESNA 12 1960687SM 2
SPACER 13 1666294SM 2
TRUNNION 14 1731894SM 2
ROD, Mower Lift 3/8-16 x 1 LG Thread 15 1734217SM 2
LIFT SHAFT ASSEMBLY 16 1733356ASM 1
SPACER, Powdered Metal 17 1673796SM 1
ARM, Lift Trunnion 18 1734336ASM 1
BOLT, Carriage, 5/16-18 x 1-1/2, G5 19 1931337SM 1
ARM, Mower Lift R.H. 20 1733536ASM 1
NUT, Hex, 1/4-20 L.H. Thread 21 1960757SM 1
WASHER, 1/4" 22 1921319SM 1
MOTOR, Mini Actuator 23 1733513SM 1
PIN, Quick 24 1722460SM 3
ROD, Height of Cut Indicator 25 1733572SM 1
INDICATOR, Height of Cut 26 1733454SM 1
NUT, Hex Two-Way Lock, 1/2-13 27 1930644SM 2
BOLT, Carriage, 5/16-18 x 1, G5 28 1931335SM 1
PIN, Shear 29 1668344SM 1
BRACKET, Electric Motor Mount 30 1733533ASM 1
BOLT, Carriage, 3/8-16 x 3/4, G5 (Used on 44" & 50" Models only) 31 1960711SM 2
PLATE, Pivot Lock (Used on 44" & 50" Models only) 32 1734379ASM 2
NUT, Hex 3/8 - 16 33 1916950SM 2
BOLT, Carriage, 1/4 - 20 x 3/4 (Used on 44" & 50" Models only) 34 1931317SM 2
NUT, Hex Flange Whiz Lock, 1/4 - 20 (Used on 44" & 50" Models only) 35 1960294SM 2
WASHER, 3/8 36 1924940SM 2
NUT, Hex, 7/16 - 14 37 1918213SM 2
NUT, Hex Two-Way Lock Flange, 3/8 - 16 38 1930645SM 2
The above parts group applies to the following Mfg. Nos.:
31
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1695447 - 50" Mower
2690642 - Axion
2690644 - Axion
2690715 - Axion
2690771 - Axion
7800376 - Axion
TP 400-4496-D-ZT-S
To Next Page
Loading...
Need help?
General
