H-7
Install catcher cover
1. Loosen the inner seat deck nuts (B) on both sides
of the discharge tube. The nuts and studs can be accessed
through the wheel wells or discharge tube opening in the
back plate.
2. Insert the cover (A) between the seat deck and back plate.
Be sure the slots in the cover (A) engage the seat deck
studs (B).
3. Tighten the seat deck nuts (B).
4. Install the cover spring (C).
5. Check the fit between the catcher and cover. Adjust
if necessary.
B
A
C
To Next Page
Loading...
