C-15
Grass catcher installation
Never operate the tractor without the grass
catcher or optional deflector installed.
Before installing the grass catcher: Engage
the parking brake, disengage the PTO, stop
the engine and remove the key.
1. Set the parking brake, turn off the PTO, turn off the
ignition, and remove the key.
2. Open the cover (C).
3. Rest the catcher assembly on the catcher arms (F).
4. Move the swing latches (E) into vertical and locked
position. Secure with clevis pins (G) and hairpin clips (D).
5. Close the cover (C).
6. Hold the catcher in the fully raised position.
7. Connect the gas shocks (A) to the tractor. Secure with
the clips (B).
8. Carefully lower the catcher.
B
C
D
E
F
G
A
To Next Page
Loading...
