Simplicity Baron - Grass Catcher Installation and Removal

C-14
Grass catcher removal
Never operate the tractor without the grass
catcher or optional deflector installed.
Before removing the grass catcher: Engage
the parking brake, disengage the PTO, stop
the engine and remove the key.
1. Set the parking brake, turn off the PTO, turn off the
ignition, and remove the key.
2. Depress the catcher release pedal (A) and empty the catcher.
3. Hold the catcher in the fully raised position, remove
the clips (B) securing the gas shocks (H) to the tractor.
Disconnect the shocks from the tractor. Carefully lower
the catcher.
4. Open the cover (C) and remove the clevis pins (G) and
hairpin clips (D) from both catcher arms (F).
5. Depress the catcher release pedal (A) and lift the catcher
assembly off the catcher arms (F).
A
B
C
D
E
F
G
H