E-8
Lubrication
Service interval: Every 25 hours
Lubricate the unit at the locations shown.
Grease
Lubricate with grease where this symbol is shown. Use grease
fittings when present. Disassemble parts to apply grease to
moving parts when grease fittings are not present. Use only
lithium grease.
Oil
Lubricate with oil where this symbol is shown. Generally, all
moving metal parts should be oiled where contact is made with
other parts.
Keep oil and grease off belts and pulleys. Remember to wipe
fittings and surfaces clean both before and after lubrication.
To Next Page
Loading...
