Simplicity BRIO CANISTER - Troubleshooting; Key Replacement Parts; For Best Performance

12
TROUBLESHOOTING
• Use machine with a bag.
• Keep machine and all accessories clean and in good operating condition.
• Replace bag when it’s 2/3 full.
• Check and replace filters every 12 months or more frequently if vacuuming fine
powders such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Genuine Simplicity filtration products are
designed for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow this owner’s manual.
• Brio Cloth Bags: SBCH-3
• Brio High-Efficiency Filter Set: SFBRIO
Any other service should be performed by an Authorized Simplicity Service Center.
To locate your nearest service center, visit our website at Simplicityvac.com,
or call 888-974-6759.
FOR BEST PERFORMANCE
KEY REPLACEMENT PARTS
Problem Check Point Possible Solution
The vacuum does
not power on.
Power cord
Insert the power plug firmly into an
electrical outlet
Suction power is
weak.
Bag Replace if the bag is full.
Blocked hose or wand Remove obstruction.
Suction power is
too strong.
Suction control dial (on
body
Rotate the dial in the direction of
the “—”
Suction airflow adjuster
(on handle)
Pull back on the slide to increase
airflow.