PART NO. DESCRIPTIONREF NO QTY.
50" Mower Deck - Height Adjustment & Roller Bar
Footnotes
SHAFT ASSEMBLY, Roller, 50", (Includes Ref. No. 10) 1 1686687SM 1
NUT, Adjuster 2 1704082SM 1
NUT, Hex Aluminum Insert Lock, 3/8-16 3 2860681SM 3
SLIDE 4 1677507SM 1
WASHER, Plain, 1/2 5 1924361SM 1
BOLT, Shoulder, 3/8-16 6 2172622SM 1
WASHER, Plain, 1 1/4 7 1924366SM 8
SPACER, 21/32 x 5/32 x 5/8 8 1709195SM 3
ROLLER, Rounded End 9 1722036SM 2
NUT, Push 10 1960520SM 2
ROLLER 11 1668513SM 8
BAR, Roller 12 1704074ASM 1
NUT, Hex Flange, 2 Way Lock, 1/2-13 13 1930644SM 2
STRAP, Mower Arm Assembly 14 1665374SM 3
CAPSCREW, Hex Head Taptite, 5/16 -18 x 3/4 15 1664847SM 6
CARRIAGE BOLT, 3/8-16 x 1-1/2 16 1931352SM 1
ARM ASSEMBLY, Mower 17 1718828ASM 1
CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G8, 1/2 Thread 18 1930570SM 2
WASHER, 5/16, Black 19 1919381SM 5
CHAIN, 4 Link, 6 3/32 Long 20 1708088ASM 2
NUT, Hex Lock ESNA Light, 5/16-18, Black 21 1919438SM 2
ROD, Adjustment 22 1722995SM 1
SPACER, 3/8 x 3/4 x 15/16 23 1706644SM 1
WASHER, 3/8 24 1924940SM 1
CAPSCREW, Hex Head, 3/8-16 x 1-3/4 25 1922606SM 1
PLATE, Mower Support 26 1704080ASM 1
CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/4 27 1931202SM 2
INDICATOR, Cutting Height 28 1704114SM 1
WASHER, Detent 29 1704097SM 1
TRUNNION 30 1704086SM 1
PIN, Roll, 1 31 2816001SM 1
TRUNNION 32 1706645ASM 1
NUT, Hex, Jam, 1/2-13 33 1915726SM 2
WASHER, 11/32 34 1960170SM 1
PIN, Clevis 35 2118053SM 1
CLIP, Hair Pin 36 1960074SM 1
NUT, Whiz Lock, 5/16-18 37 1931277SM 2
BRACKET, Cutting Height 39 1704116ASM 1
ARM, Rear, Mower, RH 40 1704083ASM 1
CAPSCREW, Hex Head, 5/16-18 x 1-1/4 41 1921977SM 2
The above parts group applies to the following Mfg. Nos.:
59
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1694039 - 50" Mower
1694045 - 50" Mower
1694174 - 50" Mower
2690415 - Conquest
2690702 - Conquest
TP 400-4204-B-CQ-SMA
To Next Page
Loading...
