To Next Page
B
Bryan ScottSep 10, 2025
What to do if the brake will not hold on my Simplicity Cobalt 2690479?
- MMrs. Pamela JenkinsSep 10, 2025
If your Simplicity Lawn Mower brake will not hold, replace with new brake pads if the brake pads are worn.
What to do if the brake will not hold on my Simplicity Cobalt 2690479?
If your Simplicity Lawn Mower brake will not hold, replace with new brake pads if the brake pads are worn.
Why does my Simplicity Cobalt 2690479 engine start hard or run poorly?
If your Simplicity Lawn Mower engine starts hard or runs poorly, the fuel mixture might be too rich. Try cleaning the air filter and checking the choke adjustment. Also, inspect the spark plug; if it's faulty, fouled, or incorrectly gapped, clean, gap, or replace it.
How to fix uneven cutting with my Simplicity Cobalt 2690479 Lawn Mower?
Uneven cutting with your Simplicity Lawn Mower can stem from several issues. Ensure the deck is leveled correctly, and that the blades are sharp, not dull or worn. Replace damaged blades. Clean out the deck if it's clogged with grass clippings. Repair or replace the deck if the shell is damaged, and address any bent or loose mower spindles. Reinstall incorrectly installed blades, and check and inflate the tires properly.
How to stop my Simplicity Cobalt 2690479 from scalping?
Scalping with your Simplicity Lawn Mower can occur if the lawn is uneven or bumpy; consider rolling or leveling the lawn. If the mower deck cutting height is set too low, raise it. Slow down if your ground speed is too fast. Ensure the deck is leveled correctly and check and inflate the tires.
Why is my Simplicity Cobalt 2690479 engine exhaust black?
If your Simplicity Lawn Mower engine exhaust is black, the air filter might be dirty, so replace it. Also, check if the engine choke control is in the closed position; if so, open it.
What to do if my Simplicity Cobalt 2690479 engine stalls easily with the mower engaged?
If your Simplicity Lawn Mower engine stalls easily with the mower engaged, set the engine to full throttle. If the ground speed is too fast, decrease it. When cutting tall grass, use the maximum cutting height during the first pass. Ensure the discharge chute isn't jamming with cut grass by cutting with the discharge pointing toward the previously cut area.
How to fix stepped cutting with my Simplicity Cobalt 2690479?
Level the deck correctly if the deck is not leveled correctly, check and inflate the tires if the tires are not properly inflated, replace the blades if the blades are damaged, repair or replace the deck if the deck shell is damaged, repair or replace the spindle if the mower spindle is bent or loose, reinstall the blades correctly if the blades are installed incorrectly.
What causes excessive belt wear on my Simplicity Cobalt 2690479 Lawn Mower?
If your Simplicity Lawn Mower experiences excessive belt wear or breakage, repair or replace bent or rough pulleys. Ensure you are using the correct belt and replace it if necessary.
How to reduce excessive vibration in my Simplicity Cobalt 2690479 Lawn Mower?
Excessive vibration in your Simplicity Lawn Mower can be due to loose blade mounting bolts; tighten them to 70 ft.lbs. (94 Nm). Check for bent mower blades, arbors, or pulleys and replace as necessary. Remove, sharpen, and balance the mower blades if they are out of balance. Ensure the belt is installed correctly.
What causes excessive oil consumption in my Simplicity Cobalt 2690479 Lawn Mower engine?
If your Simplicity Lawn Mower engine has excessive oil consumption, clean the engine fins, blower screen, and air cleaner if the engine is running too hot. If you're using the wrong weight oil, consult the engine manual. Drain excess oil if there's too much in the crankcase.
General| Brand | Simplicity |
|---|---|
| Model | Cobalt 2690479 |
| Category | Lawn Mower |
| Language | English |
Safety advice for operation and child presence.
Safety for slopes and risks from thrown objects.
Roll bar use, overhead obstacles, and fuel handling safety.
General operation, transport, storage, and gasoline rules.
Procedures for inspecting the roll bar structure.
Procedures for seat belt inspection and maintenance.
Basic safety, pre-start checks, and engine starting.
Recommended maintenance intervals for the unit.
Common problems with the rider and mower and their solutions.
