Simplicity Colt ZT2148 User Manual

Print Instructions for Print Vendors (Paper Manuals)
PAR
TS MANUAL
TOTAL PAGE COUNT: Less than 80
Paper Size: • 11 x 17
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated, pre-printed “grid” cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover imprint - 1-color, 2-sided
Bindery: • Fold & Staple (2X), Face Trim, 3-Hole Drill
TOTAL PAGE COUNT: 80 or greater
Paper Size: • 8-1/2 x 11
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated, pre-printed “grid” cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover imprint - 1-color, 2-sided
Bindery: • Perfect Bind, Face Trim (3 knife), 3-Hole Drill
GENERAL
COVERS: • Covers are located at the beginning of this package.
• Back cover is the page IMMEDIATELY AFTER the front cover.
• If supplied, the “Hardware Identification & Torque Specifications” is located IMMEDIATELY AFTER
the back cover. This page MUST be printed on the INSIDE of the BACK cover.
• Check the front cover for the individual part number (typically a 2xxxx or 182xxxx number).
• Check the front cover for the document number (TP 4xx - xxxx - xx - xx - xx)
BODY: •ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS left hand
pages.
General: • This instruction page is NOT part of the manual and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
If you have any further questions regarding this manual, please contact Ken Cehonski in
Ferris Industries Engineering Department at (315) 495-0100 ext. 249.

Simplicity Colt ZT2148 Specifications

General

Engine	Briggs & Stratton
Engine Displacement	724cc
Engine Power	21 HP
Cutting Width	48 inches
Cutting Height	1.5 - 4.5 inches
Transmission	Hydrostatic
Deck Material	Steel
Fuel Capacity	3 gallons
Fuel Tank Capacity	3 gallons
Warranty	3 years

Summary

Parts Manual Printing Instructions

General Printing Guidelines

General information and instructions for manual assembly and printing.

Hardware Identification & Torque Specifications

Hardware Identification

Identifies common hardware types and their sizing.

Torque Specifications

Provides torque values for standard machine hardware.

Rider Components

Frame, Seat, and Controls

Parts for the rider's frame, seat, controls, and instrument panel.

Powertrain and Fuel Systems

Parts for fuel, engine, PTO, and pump drive systems.

Operator Controls and Hydraulics

Components for motion control, hydraulics, and parking brake.

Electrical System Diagrams

Ignition & Operator Presence Circuit

Wiring diagram for ignition and operator presence safety systems.

Charging, Cranking & PTO Circuits

Wiring diagrams for charging, starting, and PTO clutch systems.

Decals and Mower Deck Components

Decals

Identifies brand, model, safety, and operation decals on the mower.

Mower Deck Assemblies

Parts for the mower deck housing, spindles, blades, drive, and rollers.