EasyManua.ls Logo

Simplicity Conquest 23HP - Brake and Steering Problems; Troubleshooting the Mower; Mower Lift and Cut Quality; Mower Stalling and Vibration

Simplicity Conquest 23HP
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
TROUBLESHOOTING
PROBLEM LOOK FOR REMEDY
Brake will not hold.
Internal brake worn. See authorized dealer.
Tractor steers hard or
handles poorly.
Steering linkage is loose. See authorized dealer.
Improper tire inflation. See Check Tire Pressure section.
Front wheel spindle bearings
dry.
See authorized dealer.
Troubleshooting the Tractor (Continued)
PROBLEM LOOK FOR REMEDY
Mower will not raise.
Lift linkage not properly
attached or damaged.
See authorized dealer.
Mower cut is uneven.
Mower not leveled properly. See authorized dealer.
Tractor tires not properly
inflated.
See Check Tire Pressure section.
Mower cut is rough
looking.
Engine speed too slow. Set to full throttle.
Ground speed too fast. Slow down.
Mower has other problem. See authorized dealer.
Engine stalls easily with
mower engaged.
Engine speed too slow. Set to full throttle.
Ground speed to fast. Slow down.
Dirty or clogged air filter. See Engine Manual.
Cutting height set too low. Cut tall grass at maximum cutting height during first pass.
Engine not up to operating
temperature.
Run engine for several minutes to warm-up.
Starting mower in tall grass. Start the mower in a cleared area.
Excessive mower vibration.
Mower has other problem. See authorized dealer.
Engine runs and tractor
drives, but mower will not
drive.
PTO not engaged. Engage the PTO.
Mower has other problem. See authorized dealer.
Troubleshooting the Mower
Not for
Reproduction

Related product manuals