PART NO. DESCRIPTIONREF NO QTY.
50" Mower Deck - Height Adjustment & Roller Bar Group
Footnotes
NUT, Hex Toplock Spiralock Flange 3/8-16 1 2860681SM 2
WASHER, 3/8 3 1924940SM 2
ROD, Adjusting 5 1722995SM 1
SCREW, Hex Washer Head Taptite 5/16-18 x 1-1/4 6 1931202SM 2
WASHER, 5/16 7 1919381SM 1
INDICATOR, Cutting Height 8 1704114SM 1
PLATE, Mower Support 9 1704080ASM 1
PIN, Spring 10 2816001SM 1
WASHER, Detent 11 1704097SM 1
TRUNNION, 1-1/4 12 1704086SM 1
WASHER, 1/2 13 1960170SM 1
TRUNNION, 1-1/4 14 1704087SM 1
CRANK, Height Adjusting 15 1719901SM 1
KNOB, Spinner 16 1714084SM 1
NUT, Push Pal 3/8 Diameter Stud Capped 17 1960093SM 1
SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 18 1664847SM 6
STRAP 19 1665374SM 3
NUT, Hex 5/8-11 20 1915726SM 2
WASHER, 5/8 21 1924366SM 2
TRUNNION 22 1706645ASM 1
PIN, Round Head Drilled 3/8 x 2 23 2118053SM 1
CLIP, Hair Pin 24 1960074SM 3
CAPSCREW, Hex Head 5/16-18 x 1-1/4 G5 25 1921977SM 2
BRACKET, Height of Cut 16GA 26 1704116ASM 1
NUT, Hex Flange 5/16-18, Whiz Lock Small 28 1931277SM 2
ARM, Rear R.H. 29 1704083ASM 1
SHAFT ASSEMBLY, Rocker 50" 30 1733522ASM 1
CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 31 1931352SM 1
SHAFT & BAR ASSEMBLY, Roller 50" 32 1716155ASM 1
BAR, Roller 33 1704074ASM 1
NUT, Hex Flange 1/2-13 Two-Way Lock 34 1930644SM 2
NUT, Hex Adjusting 35 1704082SM 1
SLIDE 36 1677507SM 1
WASHER, 1/2 37 1924361SM 2
BOLT, Shoulder, 3/8-16 G5 38 2172622SM 1
NUT, Push for 5/8 Diameter Stud Capped 39 1960520SM 2
ROLLER, Rounded 40 1722036SM 2
SPACER 41 1709195SM 3
WASHER, 5/8 42 1924366SM 6
ROLLER 43 1668513SM 8
CHAIN, Link 46 1731383ASM 2
ROD, Height Adjusting 51 1731384SM 2
NUT, Hex Jam 5/16-18 52 1920161SM 2
TRUNNION 53 1731382SM 2
The above parts group applies to the following Mfg. Nos.:
41
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2690679 - Conquest
TP 400-4805-00-CQ-S
To Next Page
Loading...
Need help?
General
