12
Resetting the Circuit Breaker
(Models S10S and S10D only)
WARNING! To Reduce the Risk of Electrical
Shock or Injury From Moving Parts, Unplug
Before Servicing or Cleaning.
Your vacuum features a circuit breaker to
protect the machine against damage due to
a surge in the electrical current. Electrical
surging can be a result of, though not limited
to, a jammed motor fan.
Should your vacuum cleaner experience
a jammed brushroll with the circuit breaker
tripping, first turn the vacuum off and unplug
the unit. Inspect the brushroll by removing the
bottom plate (see page 9) and remove any
debris that may be causing the jam. Reinstall the
bottom plate (see page 9) and reset the circuit
breaker by pressing the Circuit Breaker Reset
Button. Plug in the power cord and turn on the
vacuum. If the vacuum fails to turn on, visit an
Authorized Simplicity Retailer for assistance.
Replacing the Squeegee
If your squeegee splits or begins to look worn,
simply slide the worn squeegee from its track
and slide a new one into the track. If you have
trouble installing the new squeegee, please
visit an Authorized Simplicity Retailer for help.
Annual Checkup
To keep your vacuum in peak operating
condition, it is recommended you bring it
to an Authorized Simplicity Retailer for an
annual checkup. The retailer will conduct a
comprehensive examination to ensure your
vacuum is in top operating condition.
MAIntenAnCe AnD CARe
Circuit Breaker
Reset Button
To Next Page
Loading...
Need help?
General
