PART NO. DESCRIPTIONREF NO QTY.
60" Mower Deck - Roller Bar Group - (Serial No. 1 to 59999)
Footnotes
ROCKER SHAFT ASSEMBLY 1 1715877ASM 1
CARRIAGE BOLT, 3/8-16 x 1 3/4 2 1931353SM 2
WASHER 3 1960071SM 2
CARRIAGE BOLT, 3/8-16 x 1 4 1931350SM 6
LOCKWASHER, 3/8 (Early Models) 5 1916965SM 12
NUT, Hex, 3/8-16 (Early Models) 6 1916950SM 12
NUT, Hex Lock, ESNA Heavy, 3/8-16 (Later Models) 6 1922694SM 8
WASHER, 3/8 7 1924940SM 4
BRACKET, Roller, RH 8 1716982ASM 1
SLIDE 9 1677507SM 2
WASHER, 1/2 x 1 1/4 10 1924361SM 2
BOLT, Shoulder 11 2172622SM 2
NUT, Adjuster, Eccentric 12 1704082SM 2
BAR ASSEMBLY, Roller 13 1715882ASM 1
SET SCREW, Square Head, 5/16-18 x 1/2, G8 14 1928721SM 2
SHAFT, Roller 15 1715884SM 1
WASHER 16 2860156SM 8
ROLLER 17 1678043SM 8
SPACER, Long 18 1717011A 2
SPACER, Short 19 1701873SM 1
E-RING, 1/2 20 2158399SM 1
WASHER, 1/2 21 1960027SM 1
WHEEL, Slide 22 1714760SM 1
BAR ASSEMBLY, Wheel 23 1716343ASM 1
HAIRPIN 24 1960074SM 1
HITCH PIN, 3/8 25 1708298SM 1
CAPSCREW, Hex Head, 3/8-16 x 1 26 1921210SM 1
NUT, Hex Nylon, 3/8-16 27 1919439SM 1
BAR ASSEMBLY, Roller 28 1716341ASM 1
BRACKET, Roller, LH 29 1716983ASM 1
DECAL, Cutting Height 30 1717583SM 1
PLATE, Height Indicator 31 1716480ASM 1
CAPSCREW, Taptite, 5/16-18 x 1/2 32 1929000SM 1
ROD, Indicator 33 1716481SM 1
CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2 34 1924856SM 1
CARRIAGE BOLT, 3/8-16 x 2 1/4 35 1931355SM 2
SPACER 36 1676088A 2
STRAP 37 1676087ASM 2
NUT, Hex Alm Insert Lock, 3/8-16 (Later Models) 38 2860681SM 4
The above parts group applies to the following Mfg. Nos.:
133
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1692860 - 60" Mower
1693123 - 60" Mower
1693253 - 60" Mower
1694072 - 60" Mower
1694073 - 60" Mower
TP 400-2155-C-LG-SMA
To Next Page
Loading...
Need help?
General
