Simplicity SPORT - Adjusting the Suction Power for Tool Cleaning; Using the Blower Exhaust Port

9
Adjusting the Suction Power for
Tool Cleaning (Fig. 10)
On the hose handle, locate the suction
relief ring and turn it to the desired
position. This reduces the suction
power coming through the hose. Close
the suction relief ring when finished to
restore full suction power.
Using the Blower Exhaust Port
Attach the vacuum hose to the blower
exhaust port (Fig. 11). Then attach the
inflation adapter (included in the micro
tool kit) to the end of the hose for
inflating mattresses, rafts, etc (Fig. 12).
Fig. 10
Fig. 11
Fig. 12
ATTACHMENT CLEANING