1
SimpliFire • SF-MEDIA-LOGS Instructions • 2040-935 Rev. C • 9/19
SF-MEDIA-LOGS and SF-ALL84-LOGS
Model: SF-ALL40-BK, SF-ALL48-BK SF-ALL60-BK, SF-ALL84-BK,
SF-ALLP50-BK, SF-ALLP60-BK,SF-ALLP72-BK
Instructions
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during
installation and service. Sheet metal edges are sharp.
Leave this instruction with party responsible for
use and operation.
NOTICE! DO NOT discard these instructions. Important
service and maintenance instructions included.
NOTICE! DO NOT discard any hardware while
servicing. It may be reused.
WARNING! Risk of Shock! Always unplug the cord or
turn off the circuit breaker before moving or servicing.
Tools and Supplies Needed
Before beginning and installation be sure that the following
tools - supplies are available.
Gloves
Magnetic Phillips screwdriver
Safety glasses
Crystal Media (included with appliance)
Kit includes:
LOG
REFERENCE
LETTER
LOG
QUANTITY
(SF-MEDIA-LOGS)
LOG
QUANTITY
(SF-ALL84-LOGS)
A 2 3
B 1 1
C 1 2
D 1 1
E 1 1
F 1 2
G 3 5
H 2 3
Introduction
There is no specic requirements for log or media place-
ment in the SimpliFire linear replace. These placement
instructions serve as a popular example for displaying
the logs included in this kit. If your replace is longer or
shorter than what is shown in this example, the pattern
can be repeated.
Glass Front Removal
Refer to the appliance Owner’s Manual for instructions
to remove and install glass front.
CAUTION! Two adults recommended for the removal
or installation of glass front. Use caution when han-
dling glass. Failure to do so could result in personal injury
or property damage.
To Next Page
Need help?
General
