SimpliFire SF-25 User Manual

Electric Fireplace Stove
Model# SF-25
CONSUMER SAFETY INFORMATION
⚫ Read this manual before installing and operating this appliance
⚫ Failure to follow these instructions may result in electric shock, fire property, or
personal injury
⚫ Do not store or use gasoline or other flammable liquids in vicinity of this
appliance.
-1-
Getting Started
⚫ Remove the appliance from the box.
⚫ Remove any packaging from the product.
⚫ Place the packaging inside the box and either store or dispose of safely.
Contents of Carton
⚫ Heater
⚫ 1 Instruction Manual
⚫ Four Legs
⚫ 8 pcs of 4*12mm screws
⚫ Before operating this unit, please read these instructions completely and save them
for the future use.
⚫ This appliance is not intended for use by persons ( including children ) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
⚫ Children should be supervised to ensure that they do not play with the appliance.
⚫ In order to avoid any danger, the cable must be changed by the special person from
manufacture, maintain department or relative department if the cable there is any
broken.
-2-

SimpliFire SF-25 Specifications

General

Brand	SimpliFire
Model	SF-25
Category	Indoor Fireplace
Language	English

Summary

Getting Started

Consumer Safety Information

Assembling

Operation Procedure

Power Control

Controls main power and flame effect illumination. Must be lit for functions to operate.

Heat Setting I

Low heater setting providing 750W of power.

Heat Setting II

High heater setting providing 1500W of power.

Flame and Temperature Adjustment

Temperature Control

Regulated heater ensures no overheating; auto-off at unsafe temps, resumes when safe.

Flame Adjustment

Adjust the flame brightness from bright to dark according to user preference.

Safety Instructions and Precautions

Warnings and Cautions

Safety Cut-Off and Troubleshooting

Safety Cut-Off Operation

Appliance has a safety cut-off for overheating. Manual reset required by disconnecting power.

Troubleshooting Common Issues

Diagnoses and solutions for common problems like no operation or no fire effect.

Technical Specifications

Environmental Disposal Information