EasyManua.ls Logo

SimpliFire SF-BI30-EB - User Manual

SimpliFire SF-BI30-EB
21 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
SimpliFire • SF-BI30-EB, SF-BI36-EB • 2040-980 Rev. K • 7/23
Model(s):
WARNING: To reduce risk of re, electrical shock, or personal injury, read all instructions
before using appliance.
Owner’s Manual
Installation and Operation
DO NOT DISCARD THIS MANUAL
NOTICE
• Leave this manual with
party responsible for use
and operation.
DO NOT
DISCARD
• Important operating
and maintenance
instructions included.
• Read, understand and follow
these instructions for safe
installation and operation.
SF-BI30-EB
SF-BI36-EB
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN
THIS PRODUCT.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE
TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
INSTALLER: DO NOT DISCARD THIS MANUAL -
LEAVE FOR HOMEOWNER - SAVE THESE INSTRUCTIONS
Congratulations!
Congratulations on selecting a SimpliFire Electric Fireplace, an elegant and clean alternative to wood & gas burning replaces.
The SimpliFire electric replace you have selected is designed to provide the utmost in safety, reliability, and efciency.

Table of Contents

Other manuals for SimpliFire SF-BI30-EB

Preview: Service Manual
Service Manual11 pages

Questions and Answers

  • R
    Renee HutchinsonAug 18, 2025
    Why does my SimpliFire Fireplace Accessories remote control not work?
    • G
      George MeadowsAug 18, 2025
      If the SimpliFire Fireplace Accessories remote control isn't working, first replace the batteries. If that doesn't solve the issue, make sure nothing is blocking the remote receiver and that you're close enough to the appliance. If equipped, ensure the appliance power switch is in the "I" position. If none of these steps work, the control board (PCB) may need to be replaced.
  • C
    Connie DavisAug 21, 2025
    How to fix circuit breaker tripping when using SimpliFire Fireplace Accessories?
    • R
      richardrebeccaAug 21, 2025
      If the circuit breaker trips or a fuse blows when you turn on your SimpliFire Fireplace Accessories unit, it's likely exceeding the current rating of the breaker or fuse. This can happen if other appliances are on the same circuit. To resolve this, install the unit on a dedicated 15 amp circuit.
  • M
    Michelle CoxAug 23, 2025
    What to do if SimpliFire Fireplace Accessories heater won't turn on?
    • S
      Shelly AlvarezAug 23, 2025
      If the heater on your SimpliFire Fireplace Accessories won't turn on but the flame is working, first check if the remote is in thermostat mode and if the room temperature is higher than the set point. If so, increase the thermostat set point or exit thermostat mode. If that's not the issue, the appliance may have overheated, tripping the safety thermal switch. Unplug the unit or turn off power at the circuit breaker and let it cool for 15 minutes, then restore power. If the problem continues, the main control board or the heater assembly might be defective and need replacement.
  • M
    Mr. Stephen MurphyAug 26, 2025
    Why do lights dim when SimpliFire Fireplace Accessories is on?
    • S
      Samuel MarshallAug 26, 2025
      If the lights in the room dim when your SimpliFire Fireplace Accessories unit is on, it means the unit is drawing close to the circuit's current rating. To fix this, install the unit on a dedicated 15 amp circuit.
  • W
    Wesley FrenchAug 27, 2025
    Why does my SimpliFire Fireplace Accessories heater shut off automatically?
    • A
      Alan LeeAug 28, 2025
      If your SimpliFire Fireplace Accessories heater shuts off automatically or won't stay on, it could be because the room temperature is higher than the set point on the remote. Try increasing the thermostat set point or exiting thermostat mode. Alternatively, the appliance may have overheated, tripping the safety thermal switch. In that case, unplug the unit or turn off the power at the circuit breaker and let it cool down for 15 minutes before restoring power.
  • S
    Susan ClarkAug 30, 2025
    What to do if SimpliFire Fireplace Accessories won't turn on?
    • S
      Seth DunnAug 30, 2025
      If your SimpliFire Fireplace Accessories won't turn on using the manual controls, first ensure it's plugged into a working electrical outlet. If it's hard-wired, double-check the wiring connections. Also, check the fuse/breaker panel for any issues. If none of these steps work, the control board (PCB) may be defective and need replacement.
  • K
    kimjohnathanSep 1, 2025
    Why is the flame not moving in my SimpliFire Fireplace Accessories?
    • A
      Andrew ParkerSep 1, 2025
      If the flame in your SimpliFire Fireplace Accessories isn't moving, try cycling the unit on and off. If the problem persists, inspect the rotisserie and motor for any blockages or interference. If you find none, the control board (PCB) and rotisserie motor may need to be replaced.
  • E
    Edward AllenSep 4, 2025
    Why doesn't the ember bed light up on my SimpliFire Fireplace Accessories?
    • F
      Fernando MilesSep 4, 2025
      If the ember bed on your SimpliFire Fireplace Accessories isn't lighting up, refer to the operation section of the user manual. Also, check the wiring to the ember bed LEDs to ensure they are properly connected. If the wiring is secure, the control board (PCB) or the LED lights themselves may be defective and require replacement.
  • C
    chelsea51Sep 6, 2025
    Why is the flame shuddering in my SimpliFire Fireplace Accessories?
    • V
      vickieclaytonSep 6, 2025
      If the flame in your SimpliFire Fireplace Accessories is shuddering, ensure the flame rod is straight, properly mounted, and spinning freely without hitting other components. If that doesn't solve the issue, the flame rotisserie motor might be defective and need replacement.
  • S
    smithtinaSep 8, 2025
    Why is my SimpliFire Fireplace Accessories heater so noisy?
    • S
      smalljesseSep 8, 2025
      If your SimpliFire Fireplace Accessories is making excessive noise when the heater is on, inspect the heater assembly and fan for any obstructions or interference. If there are no obstructions, the blower motor may be defective and the heater assembly may need to be replaced.

Summary

Safety and Operational Notices

General Safety Warnings

Crucial warnings about electrical shock, fire, and personal injury risks.

Important Safety Instructions

Do Not Operate Warnings

Lists critical actions to avoid during operation and installation.

Safe Usage Precautions

Guidelines for safe operation, clearances, and electrical safety.

Warranty Details

Warranty Coverage and Period

Getting Started

Location and Combustible Clearances

Electrical and Stand-off Requirements

Installation Guide

Site Selection and Preparation

Choosing the location and preparing the appliance for installation.

Physical Installation Methods

Electrical Connections and Finishing

Details on wiring the unit and finishing the fireplace wall.

Operating Your Fireplace

Manual Switch Operation

How to use manual buttons for power, flame, and heater functions.

Remote Control Features

Resetting the Temperature Cutoff

Maintenance and Servicing

Cleaning and General Maintenance

Troubleshooting Common Issues

SimpliFire SF-BI30-EB Specifications

General IconGeneral
TypeElectric Fireplace
Size30 inches
StyleBuilt-in
Power SourceElectric
Remote ControlYes
InstallationBuilt-in
Color OptionsBlack
Voltage120V
ThermostatYes
Power Consumption1500W

Related product manuals