Simpson 260 - Low Frequency Correction for Output Measurements

l.
2e.
3.
20
OPERATING INSTRUCTIONS
FOR HIGH FREQUENCY
RESPONSE, SEE
VOLTAGE RESPONSE
CURVES ON РАСЕ 18
CONTACTS
AND
SWITCH
POSITIONS
FOR
OUTPUT.
Set the function switch on the left hand
side of the front panel at A.C.
Connect the black test lead in the COMMON-
jack and the red test lead in the OUTPUT
jack,
Set the range selector switch at the desired
range position. These are marked 2.5 Ve,
LO Vg, 50 V.,, and.250 V.