Simpson 906 - Using the Timer and Clock (Continued); Programmable Timer Features; Setting the Cooking Duration; Setting the Cooking End Time

16
USING THE TIMER AND CLOCK (Continued)
Your 3 button programmable timer has the following features:
• Timer – your 3 button programmable timer allows you to set a countdown time that will beep when the set
time has elapsed.
• Cooking duration – You can set a cooking duration. A timer will count down the preset cooking time, beep
when the time has elapsed and turn the appliance off.
• End cooking time – you can set a cooking finish time. A timer will count down the preset cooking time,
beep when the finish time has been reached and turn the appliance off.
• Delayed start cooking time – You can combine the cooking time and end cooking time to switch the oven
on and off at a specific time during the day.
SETTING THE TIMER
1. Press the “mode” button until the “timer” indicator
begins flashing.
2. Set the countdown time you want by using the – and + buttons. 5 seconds after the last change the “timer”
indicator
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press any button.
SETTING THE COOKING DURATION
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the heating source
will come on.
3. Press the “mode” button until the “cook time” indicator
begins flashing.
4. Set the cooking duration you want by using the – or + buttons. 5 seconds after the last change, the “cook
time” indicator
will stop flashing, and the time of day will be displayed.
Note: Do not forget to add preheating time if necessary.
SETTING THE COOKING END TIME
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the heating source
will come on.
3. Press the “mode” button until the “end time” indicator
begins flashing.
4. Enter the time of day you want to finish cooking by pressing the – or + buttons. 5 seconds after the last
change, the “end time” indicator will stop flashing and the current time of day will be displayed.
SETTING THE DELAYED START COOKING TIME
1. Program the “cook time” and “end time” as described in the relevant sections. Once both the “cook time”
and “end time” have been set, the “cook time” and “end time” indicators will stop flashing and the current
time of day will be displayed.
ON COMPLETION OF COOKING
The heat source will turn off, the timer will beep and the “end time” and/or “cook time” indicators will flash.
1. Turn the function and temperature controls to the off position.
2. Press any button to stop the timer from beeping.
2