Simpson Hybrid User Manual

Installation Manual
The products and parts shown herein are to be installed and used adjusted in accordance with these
instructions. Any deviation by the buyer, installer, or user from these instructions constitutes willful neg-
ligence. Products and parts are not to be used if defective, damaged or worn. Products and parts are
not to be used after a severe use, in any event.
Version 6-09

Simpson Hybrid Specifications

General

Brand	Simpson
Model	Hybrid
Category	Safety Equipment
Language	English

Summary

Attaching Helmet D-Rings

Locating D-Ring Positions

Detailed steps to accurately mark the helmet for D-ring attachment points.

Hybrid X Front Tether Installation

Restraint System Mounting Zones

Fitting Restraint to Wearer

Adjusting the Chest Strap

Guide on adjusting the chest strap for proper fit and load path.

Waist Strap Adjustment and Fitting

Helmet Tether In-Car Adjustment

Adjusting Restraint Tethers

Instructions for adjusting helmet tethers for driver comfort and safety.

Side Stabilizing Gusset Adjustment

Quick Release Tether Placement