12
1 2
Removing radio from clip
1. Tilt bottom of radio away from
bulkhead
2. Lift radio up and out of clip
Inserting battery
(Battery is supplied fitted backwards to
prevent accidental discharge)
1. Remove battery by pressing tabs.
Remove label from battery contacts.
2. Re-insert battery the correct way
round. Press battery into radio until it
clicks home.
NOTE - Do not use the battery unless
there is an emergency.
Battery Life Guidelines
The radio has been designed to exceed the requirements of battery life for GMDSS
handheld radios. However, use transmit sparingly to maximise battery life.
E03362 Issue 1.0 25/6/98
To Previous Page
Loading...
Need help?
General
