Need help?Do you have a question about the Simrad RS40 and is the answer not in the manual?
General| Type | VHF Marine Radio |
|---|---|
| Display | LCD |
| AIS Receiver | Yes |
| NMEA 2000 | Yes |
| Waterproof Rating | IPX7 |
| Output Power | 25W |
| NMEA 0183 | Yes |
| Modulation | FM |
| Power Supply | 12V DC |
| DSC | Class D |
| Channels | International, US, Canadian |
| GPS | Built-in |
| Frequency Range | 156.025 MHz to 162.025 MHz |
| Weight | 1.2 kg |
Describes the function of the channel knob for selection and VOL/SQL for adjustments.
Explains the functions of X (EXIT), DSC/AIS access, and NAV/MOB buttons.
Set up DSC function, MMSI, ATIS, and related acknowledgments.
Configure AIS functions, silent mode, CPA/TCPA, and various alarm types.
Enable DSC and enter the required MMSI number for its operation.
Configure ATIS for inland use and select Sea/Inland modes.
Enable AIS, manage silent mode, set CPA/TCPA alarms, and configure vessel data.
Set up GPS alerts for invalid data and enable radio response to weather alerts.
Introduces the HS40 wireless handset and its pairing process.
Guides on pairing and removing HS40 wireless handsets.
Lists Individual, Distress, Group, and All Ships DSC call types.
Details initiating a distress call and selecting the nature of distress.
Introduces the Track Buddy feature for recurring position requests.
Enable AIS receiver/transmitter, manage silent mode, and configure vessel data.
Select AIS display options and monitor Time to CPA for collision avoidance.
Make public address announcements using the Hailer speaker and hand mic.
Select fog horn sounds and use the intercom feature between units.
Describes bracket/flush mounting and criteria for selecting a location.
Details factors for built-in GPS performance and bracket installation steps.
Provides detailed procedures for flush mounting and installing the hand mic bracket.
Recommendations for mounting the GPS antenna for optimal signal reception.
Details wiring connections, safety precautions, and connector identification.
Guides initial setup for region, MMSI, ATIS ID, and vessel call sign.
To Next Page
