Simrad Shipmate RS8400 User Manual

1
Simrad
VHF Radiotelephones
Shipmate
RS8400
RS8300
183.2047.005 Rev.I English
Warning!
The SOS function may only be used in case of emergency and with the correct
DSC number coded into the system. The number can be checked by pressing
E á 98E for the first five digits and E á97 E for the last five digits.
Do not disconnect the handset while the unit is switched ON.

Simrad Shipmate RS8400 Specifications

General

Brand	Simrad
Model	Shipmate RS8400
Category	Radio
Language	English

Summary

Distress Call Procedures

Manual Distress Call

Step-by-step guide for initiating a manual Mayday call.

Automatic Distress Call (DSC)

How to activate the automatic SOS distress call using DSC.

DSC and ATIS Configuration

Programming DSC Identity Number

Instructions for entering the vessel's DSC identity number.

Programming ATIS Identity Number

Instructions for entering the ATIS number for regional traffic.

System Introduction and Features

System Overview and SOS Features

General introduction and specific features of the RS8300 SOS model.

Handset Interface

International Handset Status Displays

Explains status icons and indicators for international channel sets.

US Handset Status Displays

Explains status icons and indicators for US channel sets.

Handset Key Functions

Details the purpose and operation of each key on the handset.

Power Management

ON/OFF Switch Operation

How to switch the main unit and handset on and off.

Position and Time Input

Manual Position Data Entry

Guide to manually inputting latitude, longitude, and UTC time.

Channel Selection

Selecting VHF Channels

How to select distress, public, and private channels.

International and US Channel Modes

Procedure for toggling between US and International channel systems.

Settings and Adjustments

Output Power and Squelch Control

How to set output power and adjust squelch levels.

Volume Adjustment

Guide for controlling speaker volume.

Scanning Features

Dual Watch Functionality

How to activate and use Dual Watch for monitoring two channels.

Scan All Mode Operation

How to monitor all available channels for transmissions.

Scan Programme Mode

How to set up and use a programmable scan list.

Intercom and Audio Features

Intercom Communication

How to use the intercom feature between handsets.

Muting and Illumination Settings

How to mute speakers and adjust display illumination levels.

Installation Guide

System Connections and Power Requirements

Details on NMEA, power supply, fuses, and cable requirements.

Main Unit and Handset Mounting

Instructions for installing the transceiver unit and handset cradle.

Speaker Installation

Steps for installing the external speaker unit.

Flush Mounting Speaker

Instructions for flush mounting the speaker for a cleaner installation.

Multiple Handset Configuration

How to connect and configure multiple handsets.

Optional PA-HAILER

PA-HAILER Installation and Use

Guide for installing and operating the optional PA-HAILER horn.

Technical Data

General System Specifications

Details on power, voltage, channels, frequency, and connectors.

Transmitter, Receiver, and Loudspeaker Specs

Technical details for transmitter, receiver, and loudspeaker components.

Warranty Information

SIMRAD Product Warranty Terms

Outlines the warranty period, coverage, and conditions for SIMRAD products.