Simrad Shipmate RS8400 - Flush Mounting Speaker

27
INSTALLATION
45
25 59 6
9 69
2
2
6
9
4
8
3
0
5
3
6
.
5
-
7
85mm
How to flush mount a
speaker
1. Locate the exact position for the
speaker.
2. Cut out the hole as indicated
(shaded area).
3. Drill two Ø2mm holes.
4. Fasten with two 3x14mm selftap-
ping screws (not included).
5. Insert the speaker into the cut-
out and slide it into its correct posi-
tion. The two screws will lock into
two keyhole-shaped holes.
Ø2mm