Simrad RS40 User Manual

| 61
Installation | RS40/RS40-B User Guide
First startup conguration
The first time the radio is powered up, the user is prompted to make
a series of setting selections in order to allow the radio to perform to
its full potential. Some steps must be completed; some are optional
and can be completed later.
Press DSC/MENU button to move the cursor 1 digit to the left; press
TRI button to skip this screen and move to the next; press X button
to go back one screen.
The steps are outlined below for reference:
1. Select the country and region the radio will be operated in:
2. Enter MMSI number if known, or skip to next step. Re-enter number
to confirm correct entry:
¼ Note: MMSI entry can only be done once. Changing the MMSI
requires radio be returned to a Simrad dealer.
3. If you have selected the Country mode to be EU, some EU regions
require you to setup ATIS. Enter the ATIS ID number. Re-enter
number to confirm correct entry:
4. Enter vessel call sign if known, or skip to next step (maximum 7
digits):

Simrad RS40 Specifications

General

Type	VHF Marine Radio
Display	LCD
AIS Receiver	Yes
NMEA 2000	Yes
Waterproof Rating	IPX7
Output Power	25W
NMEA 0183	Yes
Modulation	FM
Power Supply	12V DC
DSC	Class D
Channels	International, US, Canadian
GPS	Built-in
Frequency Range	156.025 MHz to 162.025 MHz
Weight	1.2 kg